Groove Cutting Services in Hyderabad

Groove Cutting is ideally used for cutting the hard concrete for expansion joints, asphalt pavement cut, pot whole repair cut. Our range of Groove Cutting Machine is used in various applications such as construction industries.

Concrete is among the most commonly used building materials. One of the only downsides of this material is its permanent nature; once concrete has had time to dry and cure, it can prove difficult to effectively alter without destroying the finished product. Cutting set concrete is a common procedure for adding anything from aesthetic joints to drains and electric chases. Although this may seem like an intimidating task, it can be successfully completed by just about anyone with the proper tools and instructions.

Cutting hardened concrete is usually done to incorporate aesthetic joints or electric chases. Given the hardness of set concrete, this may seem like a job for construction professionals only. But you can actually do this yourself with the help of the right construction tools and equipment, namely the circular concrete saw.

Procedure of Groove Cutting:

Leaving the concrete surface to get cured for a minimum of 72 hours after casting to avoid chipping off of edges.

Cutting the concrete using heavy duty Cutting Machine with diamond cutting wheel of 4mm thickness.

The Minimum thickness of the Grooves should be 4mm and Minimum depth of the Groove should be one fourth of the thickness of the concrete.

Cleaning the Grooves using air blower and filling with appropriate sealant.

Benefits of Groove Cutting:

To help accommodate the movement of the concrete and avoid Cracking of Concrete and long-lasting damage.

Gives Appealing Looks.