Home \ Blog
In this system, the VDF floors or vacuum dewatered flooring, concrete is poured into place and the vibrations from the vibrator particularly on the sides of the panels for the thickness of the floor more than 100 mm. At that point a surface vibration by utilizing double beam screed vibrator works over a surface is strengthened on the channel formwork separated 4.0 m from each other. Screed vibrator to run twice to accomplish the ideal sealing and Vibrobetona, then a surface arrangement is adjusted using the calibration line.
After that, the system of the lower and upper floor mats mat stack on new concrete and joined to the vacuum pump. It draws out overabundance water, assuming any, the concrete left to set. At the point when the base cement is solidified at the time when the movement traffic light foot leaves a print around 3-6 mm, surface hardener is put at an even rate of between 3-5 kg/Sqmt any draining water have to have vanished, but now concrete must be wet sparkle. Concrete is then further compacted and is adjusted to the force of the Floater then, completing as a rubbing machine.
vdf flooring (4)
False Ceiling (1)
Epoxy flooring (2)